Brick Pattern 3D Textured Non-woven Wallpaper Sticker Background Home Decoration


SKU: MLSKU467082 Category:


Package included:
1X Wallpaper(not included wallpaper glue)

1. Natural non-woven well-made
2. Pure non-woven fabric as the substrate, the rear surface printing water-based ink, then coated with special materials, special processing, with sound-absorbing and deformation advantages, and there is a strong respiratory function
3. It’s extremely thin, very easy to use
4. Exquisite wallpaper printing, Upgrade material, Wear-resistant, Breathable, Waterproof, Durable, Environmental protection, Easy maintenance
5. Wallpaper can be widely applied to all residential and commercial premises

1.Material: Non-woven
2.Size: 0.53x10m
3.Usage: Living room, Bedding room, Study, Kids’ room, TV Background.

Note: 1. Need to be mounted with wallpaper glue(not included)
2. The walls must be dry, smooth and clean, it is regarded as handled well when the walls of uniform color.
3. Natural plant fiber wallpaper ensure the wallpapers not bubble water before paste, or do not wet partial of it.
4. Daily cleaning, do not wash by water , only wipe with a dry cloth or a vacuum cleaner.

Paving procedures:
1. The wall has been handled well painted wallpaper paste special base film, and let it dry.
2. to draw a vertical line from the ceiling to the floor, this line as the first piece of wallpaper paste edges.
3. According to a desired size cut a good wallpaper, and turn the cut wallpaper in order, and then compare the color dark to light carefully then the cut wallpaper should be arranged from dark to light or from shallow to deep, marked with serial number on the back. Note contrasting colors, so as not to stick wrong.
4. To brush glue evenly over the back of the wallpaper, you must brush the edge of the wallpaper, we can not stick to the front of wallpaper, to ensure a clean surface, avoid the risk of wrinkles. Over 3-5 minutes, then wallpaper soaked, the wallpaper can be pasted on the wall. Wallpaper paste to the wall, it should be removed air bubbles, wrinkles and excess glue carefully, the method is to use hard scrubbing brush, brush from the middle to both sides. When glue Stick on the positive of wallpaper used cloth to wipe it immediately
5. When the first volume finished pasted, If there are any color difference and issues, please stop in time, in order to avoid too much damage.
6. Wallpaper should be affixed in a dry wall, the front of the wallpaper can not wipe with a damp cloth, to avoid fade after wet.


There are no reviews yet.

Be the first to review “Brick Pattern 3D Textured Non-woven Wallpaper Sticker Background Home Decoration”

Your email address will not be published.